Razberry

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
(Created page with " == Installation == wget -q -O - http://razberry.z-wave.me/install | sudo bash Start with: sudo /etc/init.d/zbw_connect start == Configuration == Edit /etc/opt/agocont...")
 
(Configuration)
Line 12: Line 12:
 
  [zwave]
 
  [zwave]
 
  device=/dev/ttyAMA0
 
  device=/dev/ttyAMA0
 +
 +
== Raspberry Pi 3 configuration ==
 +
 +
Edit /boot/config.txt, add this line at the end:
 +
dtoverlay=pi3-disable-bt
 +
 +
Execute:
 +
sudo systemctl disable hciuart
 +
sudo reboot

Revision as of 13:27, 23 December 2016

Installation

 wget -q -O - http://razberry.z-wave.me/install | sudo bash


Start with:

sudo /etc/init.d/zbw_connect start


Configuration

Edit /etc/opt/agocontrol/conf.d/zwave.conf

[zwave]
device=/dev/ttyAMA0

Raspberry Pi 3 configuration

Edit /boot/config.txt, add this line at the end:

dtoverlay=pi3-disable-bt

Execute:

sudo systemctl disable hciuart
sudo reboot
Personal tools