Raspberry Pi

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
m
Line 30: Line 30:
 
I recommend using Raspian Jessie lite (minimised image, no GUI etc.) [https://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2015-11-24/2015-11-21-raspbian-jessie-lite.zip]  
 
I recommend using Raspian Jessie lite (minimised image, no GUI etc.) [https://downloads.raspberrypi.org/raspbian_lite/images/raspbian_lite-2015-11-24/2015-11-21-raspbian-jessie-lite.zip]  
 
Full version [http://downloads.raspberrypi.org/raspbian_latest]<br/>  
 
Full version [http://downloads.raspberrypi.org/raspbian_latest]<br/>  
(If you're on a RPi1, you must use a wheezy image: [http://downloads.raspberrypi.org/raspbian/images/raspbian-2015-05-07/2015-05-05-raspbian-wheezy.zip])<br/>
 
  
 
Get the image to an SD card, e.g. using one of these tutorials: [http://www.raspberrypi.org/documentation/installation/installing-images/windows.md Windows], [http://n00blab.com/how-to-create-raspberry-pi-sd-card/ Linux], [http://www.raspberrypi.org/documentation/installation/installing-images/mac.md Mac]<br/>
 
Get the image to an SD card, e.g. using one of these tutorials: [http://www.raspberrypi.org/documentation/installation/installing-images/windows.md Windows], [http://n00blab.com/how-to-create-raspberry-pi-sd-card/ Linux], [http://www.raspberrypi.org/documentation/installation/installing-images/mac.md Mac]<br/>

Revision as of 22:42, 26 December 2015

Pi2B1.jpeg

Contents

Installation with readymade images

Raspberry Pi 1 / RPiB+ (ARMv6)

Jessie image created from raspbian-ua-netinst v1.0.7, based on the guide below to get Agocontrol installed and working, then updated Wheezy to Jessie. Details how to to the update, see [1] user: pi password: raspbian (Note root account also enabled: root/raspbian) Locale to en_DK and city to Copenhagen, change for your need. You must minimum use an 8GB SD card.

Link to RPI B+ AMRv6 image: [2] (Older: [3])
Verify the download with: md5sum raspbian_jessie_agocontrol_ver01.img.xz 396e7df1ca9cda1220edd86e6645f477 raspbian_jessie_agocontrol_ver01.img.xz

This will copy your image to your 8GB SD card. the "--keep" ensure your original image isn't deleted after decompressing

sudo xzcat --keep raspbian_jessie_agocontrol.img.xz |  sudo dd of=/dev/sdb
sync

You might have another /dev/sdb, check in a console "demsg |grep sd"

Raspberry Pi 2 / RPiB2 (ARMv7)

Download Debian Jessie image at: [4]

The apt sources list is already configured. So no need to mess with it. But if you change it, make sure to use our regular repository, not the raspbian one.

User: root
Password: agocontrol

Installation from scratch

This is a full walk-through example install on a headless Raspberry Pi.

OS (headless)

I recommend using Raspian Jessie lite (minimised image, no GUI etc.) [5] Full version [6]

Get the image to an SD card, e.g. using one of these tutorials: