RaspberryPiGPIO

From ago control wiki
Revision as of 09:06, 6 February 2014 by Kezza (Talk | contribs)

Jump to: navigation, search

Raspberry Pi GPIO input output driver

This devices enables the GPIO pins of the Raspberry Pi to be used as input and output devices.

Configuration

Add the following to the /etc/opt/agocontrol/conf.d/raspiGPIO.conf change the pin numbers to what you are using:

[raspiGPIO]
inputs=18,23 
outputs=22,24,25

If you find the on/off commands does the opposite to what it should then add the following to the raspiGPIO.conf file

reverse=1

Installation

sudo apt-get install agocontrol-raspigpio
Personal tools