RaspberryPiGPIO

From ago control wiki
Revision as of 16:33, 29 October 2013 by Dinki (Talk | contribs)

Jump to: navigation, search

Raspberry Pi GPIO input output driver

This devices enables the GPIO pins of the Raspberry Pi to be used as input and output devices.

Configuration

Add the following to the /etc/opt/agocontrol/conf.d/raspiGPIO.conf change the pin numbers to what you are using:

[raspiGPIO]
inputs=18,23 
outputs=22,24,25

Installation

sudo apt-get install agocontrol-raspigpio
Personal tools