RaspberryPiGPIO

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
(Configuration)
Line 3: Line 3:
 
This devices enables the GPIO pins of the Raspberry Pi to be used as input and output devices.
 
This devices enables the GPIO pins of the Raspberry Pi to be used as input and output devices.
 
= Configuration =
 
= Configuration =
Add the following to the config.ini change the pin numbers to what you are using:
+
Add the following to the /etc/opt/agocontrol/conf.d/raspiGPIO.conf change the pin numbers to what you are using:
 
  [raspiGPIO]
 
  [raspiGPIO]
 
  inputs=18,23  
 
  inputs=18,23  
  outputs=22,24,25  
+
  outputs=22,24,25
 +
 
 
= Installation =
 
= Installation =
 
  sudo apt-get install agocontrol-raspigpio
 
  sudo apt-get install agocontrol-raspigpio

Revision as of 16:33, 29 October 2013

Raspberry Pi GPIO input output driver

This devices enables the GPIO pins of the Raspberry Pi to be used as input and output devices.

Configuration

Add the following to the /etc/opt/agocontrol/conf.d/raspiGPIO.conf change the pin numbers to what you are using:

[raspiGPIO]
inputs=18,23 
outputs=22,24,25

Installation

sudo apt-get install agocontrol-raspigpio
Personal tools