MySensors

From ago control wiki
Revision as of 19:09, 14 May 2014 by Hari (Talk | contribs)

Jump to: navigation, search

MySensors support

You can use self built sensors from the [MySensors project|http://www.mysensors.org]

Installation

Install the agocontrol-mysensors package

Configuration

The my sensors driver assumes /dev/ttyACM0 as default interface. You need to create a config (mysensors.conf) if yours is different. For example with '/dev/ttyUSB0' use this:

[mysensors]
device=/dev/ttyUSB0
Personal tools