MySensors

From ago control wiki
Revision as of 19:04, 14 May 2014 by Hari (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

MySensors support

Installation

Install the agocontrol-mysensors package

Configuration

The my sensors driver assumes /dev/ttyACM0 as default interface. You need to create a config (mysensors.conf) if yours is different. For example with '/dev/ttyUSB0' use this:

[mysensors]
device=/dev/ttyUSB0
Personal tools