MySensors

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
m (MySensors support)
(Configuration)
Line 7: Line 7:
 
  [mysensors]
 
  [mysensors]
 
  device=/dev/ttyUSB0
 
  device=/dev/ttyUSB0
 +
 +
Mappings can be edited/deleted from the file /etc/opt/agocontrol/maps/mysensors.json .

Revision as of 17:54, 16 May 2014

MySensors support

You can use self built sensors from the MySensors project

Installation

Install the agocontrol-mysensors package

Configuration

The my sensors driver assumes /dev/ttyACM0 as default interface. You need to create a config (mysensors.conf) if yours is different. For example with '/dev/ttyUSB0' use this:

[mysensors]
device=/dev/ttyUSB0

Mappings can be edited/deleted from the file /etc/opt/agocontrol/maps/mysensors.json .

Personal tools