KNX

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
(Created page with " === [http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibd eibd] connection === You can specify a connection URL for [[http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibd e...")
 
m (eibd connection)
Line 1: Line 1:
  
 
=== [http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibd eibd] connection ===
 
=== [http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibd eibd] connection ===
You can specify a connection URL for [[http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibd eibd] with the following [[config.ini]] snippet:
+
You can specify a connection URL for [http://www.auto.tuwien.ac.at/~mkoegler/index.php/eibd eibd] with the following [[config.ini]] snippet:
 
  [knx]
 
  [knx]
 
  url=127.0.0.1:6720
 
  url=127.0.0.1:6720
 
This is already set as default when no setting is done via the config file.
 
This is already set as default when no setting is done via the config file.
 +
 
=== Device configuration ===
 
=== Device configuration ===
 
The device configuration is done via a XML file named "/etc/opt/agocontrol/knx/config.xml". You can override the path with a "devicesfile=..." entry in the [[config.ini]]. This XML file defines the mapping between group addresses (GA) and ago control devices. The mapping is done like this:
 
The device configuration is done via a XML file named "/etc/opt/agocontrol/knx/config.xml". You can override the path with a "devicesfile=..." entry in the [[config.ini]]. This XML file defines the mapping between group addresses (GA) and ago control devices. The mapping is done like this:

Revision as of 20:57, 12 November 2012

eibd connection

You can specify a connection URL for eibd with the following config.ini snippet:

[knx]
url=127.0.0.1:6720

This is already set as default when no setting is done via the config file.

Device configuration

The device configuration is done via a XML file named "/etc/opt/agocontrol/knx/config.xml". You can override the path with a "devicesfile=..." entry in the config.ini. This XML file defines the mapping between group addresses (GA) and ago control devices. The mapping is done like this:

<devices>
  <device uuid="5e4c10c2-05ab-46eb-ad9d-4dc39f4d4913" type="switch">
	<ga type="onoff">0/0/101</ga>
	<ga type="onoffstatus">0/0/102</ga>
  </device>
  <device uuid="4b568cb7-26be-4486-ad7e-0a16f9915162" type="drapes">
	<ga type="onoff">0/0/33</ga>
	<ga type="setlevel">0/0/32</ga>
	<ga type="levelstatus">0/0/31</ga>
	<ga type="stop">0/0/34</ga>
  </device>
</devices>
Personal tools