From ago control wiki
Revision as of 15:40, 29 October 2013 by Dinki (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

APC Switched Rack PDU

You can turn off and on power outlets now via ago control. It also checks the current power load of the device and reports it on change. The communication to the APC device is done with SNMP - so mind to enable it and configure the community's. Just install the package:

apt-get install agocontrol-apc

Configure it in /etc/opt/agocontrol/conf.d/apc.conf:


Hint: Mind to change your community's to something else - not public or private - or put APC Device in some protected management network

Enable and start the service:

systemctl enable agoapc.service
systemctl start agoapc.service
Personal tools