1Wire

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
(1-Wire OWFS)
(Configuration)
Line 7: Line 7:
 
  [owfs]
 
  [owfs]
 
  device=/dev/ttyUSB1
 
  device=/dev/ttyUSB1
You also can add a custom UDEV rule - have a look at [http://wiki.agocontrol.com/index.php/Ago_control_install_debian_wheezy ago control installation on Debian]
+
You also can add a custom UDEV rule - have a look [[Ago_control_install_debian_wheezy#add_udev_rules_.28optional.29|here]]. You don't need to configure the 1wire slave devices, they will be auto-detected on the 1-wire bus.
  
You don't need to configure devices, they will be auto-detected on the 1-wire bus.
 
 
== Startup ==
 
== Startup ==
 
Start the service:
 
Start the service:
 
  systemctl start agoowfs.service
 
  systemctl start agoowfs.service

Revision as of 23:16, 4 December 2012

1-Wire OWFS

ago control supports 1-Wire (OWFS). You easily can install the package:

agocontrol-owfs

Configuration

Mind to change device settings in /etc/opt/agocontrol/config.ini :

[owfs]
device=/dev/ttyUSB1

You also can add a custom UDEV rule - have a look here. You don't need to configure the 1wire slave devices, they will be auto-detected on the 1-wire bus.

Startup

Start the service:

systemctl start agoowfs.service
Personal tools