1Wire

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
(Configuration)
(Configuration)
Line 4: Line 4:
 
  agocontrol-owfs
 
  agocontrol-owfs
 
== Configuration ==
 
== Configuration ==
Mind to change device settings in /etc/opt/agocontrol/[[config.ini]]. This example would specify a 1wire device that shows up as serial port:
+
Mind to change device settings in /etc/opt/agocontrol/ows.conf . This example would specify a 1wire device that shows up as serial port:
 
  [owfs]
 
  [owfs]
 
  device=/dev/ttyUSB1
 
  device=/dev/ttyUSB1

Revision as of 16:22, 29 October 2013

1-Wire OWFS

ago control supports 1-Wire (OWFS). You easily can install the package:

agocontrol-owfs

Configuration

Mind to change device settings in /etc/opt/agocontrol/ows.conf . This example would specify a 1wire device that shows up as serial port:

[owfs]
device=/dev/ttyUSB1

You also can add a custom UDEV rule to assign a specific name to the device - have a look here. Some devices like the DS1490F don't provide a usbserial port. Use the following setting for them:

device= usbzwave

Please also adjust the permissions for such devices via udev. Create a file named "/etc/udev/rules.d/99-owfs.rules":

SUBSYSTEM!="usb_device", ACTION!="add", GOTO="owfs_rules_end"
 
# DS2490 1-Wire adapter
ATTRS{idVendor}=="04fa", ATTRS{idProduct}=="2490", MODE="660", GROUP="agocontrol"
 
LABEL="owfs_rules_end"

You don't need to configure the 1wire slave devices, they will be auto-detected on the 1-wire bus.

Startup

Start the service:

systemctl start agoowfs.service
Personal tools