1Wire

From ago control wiki
(Difference between revisions)
Jump to: navigation, search
(Configuration)
m (Configuration)
 
(6 intermediate revisions by 4 users not shown)
Line 4: Line 4:
 
  agocontrol-owfs
 
  agocontrol-owfs
 
== Configuration ==
 
== Configuration ==
Mind to change device settings in /etc/opt/agocontrol/ows.conf . This example would specify a 1wire device that shows up as serial port:
+
 
 +
Mind to change device settings in /etc/opt/agocontrol/conf.d/owfs.conf . This example would specify a 1wire device that shows up as serial port:
 
  [owfs]
 
  [owfs]
 
  device=/dev/ttyUSB1
 
  device=/dev/ttyUSB1
 
You also can add a custom UDEV rule to assign a specific name to the device - have a look '''[[Ago_control_install_debian_wheezy#add_udev_rules_.28optional.29|here]]'''.
 
You also can add a custom UDEV rule to assign a specific name to the device - have a look '''[[Ago_control_install_debian_wheezy#add_udev_rules_.28optional.29|here]]'''.
 
Some devices like the DS1490F don't provide a usbserial port. Use the following setting for them:
 
Some devices like the DS1490F don't provide a usbserial port. Use the following setting for them:
  device= usbzwave
+
  device=u
 
Please also adjust the permissions for such devices via udev. Create a file named "/etc/udev/rules.d/99-owfs.rules":
 
Please also adjust the permissions for such devices via udev. Create a file named "/etc/udev/rules.d/99-owfs.rules":
 
<pre>
 
<pre>

Latest revision as of 16:04, 7 February 2015

[edit] 1-Wire OWFS

ago control supports 1-Wire (OWFS). You easily can install the package:

agocontrol-owfs

[edit] Configuration

Mind to change device settings in /etc/opt/agocontrol/conf.d/owfs.conf . This example would specify a 1wire device that shows up as serial port:

[owfs]
device=/dev/ttyUSB1

You also can add a custom UDEV rule to assign a specific name to the device - have a look here. Some devices like the DS1490F don't provide a usbserial port. Use the following setting for them:

device=u

Please also adjust the permissions for such devices via udev. Create a file named "/etc/udev/rules.d/99-owfs.rules":

SUBSYSTEM!="usb_device", ACTION!="add", GOTO="owfs_rules_end"
 
# DS2490 1-Wire adapter
ATTRS{idVendor}=="04fa", ATTRS{idProduct}=="2490", MODE="660", GROUP="agocontrol"
 
LABEL="owfs_rules_end"

You don't need to configure the 1wire slave devices, they will be auto-detected on the 1-wire bus.

[edit] Startup

Start the service:

systemctl start agoowfs.service
Personal tools