Razberry

From ago control wiki
Jump to: navigation, search

Contents

The Z-way server

The Z-way server is useful for adding devices, but not needed when running the system

Installation

 wget -q -O - http://razberry.z-wave.me/install | sudo bash

Start with:

sudo /etc/init.d/zbw_connect start

Disabling the Z-way server

You can disable it with:

sudo update-rc.d z-way-server disable
sync
sudo reboot

Agocontrol support

You enable the agocontrol support the same way as with other Z-wave hardware.

Configuration

Edit /etc/opt/agocontrol/conf.d/zwave.conf

[zwave]
device=/dev/ttyAMA0


Raspberry Pi 2 and 3

Edit /boot/config.txt to enable serial communication, add/chnage to:

enable_uart=1

Add authorisation for using the serial port:

sudo adduser pi dialout
sudo adduser agocontrol dialout
sudo adduser root dialout
sudo adduser pi tty
sudo adduser agocontrol tty
sudo adduser root tty

Edit /boot/cmdline.txt Remove any reference to: console=tty1 or console=serial0,115200


Raspberry Pi 3 configuration

!!! You need to disable onboard Bluetooth !!!

Edit /boot/config.txt, add these lines at the end:

# RaZberry - need to disable onboard Bluetooth
dtoverlay=pi3-disable-bt

Execute:

sudo systemctl disable hciuart
sudo reboot
Personal tools