RaspberryPi1Wire

From ago control wiki
Jump to: navigation, search

Contents

Raspberry Pi GPIO 1-wire device

This devices enables the 1-wire support on GPIO pin 4 of the Raspberry Pi

Installation

apt-get install agocontrol-raspi1w

Configuration

Configuration file is located at /etc/opt/agocontrol/conf.d/raspi1wGPIO.conf

[raspi1wGPIO]
interval=600 # maximum time(seconds) between reports
change=0.2   # temperature change between reports


If you have troubles to get your 1wire devices, then add this:

sudo nano /boot/config.txt

Add this content

dtoverlay=w1-gpio,gpiopin=4

suported sensors

  • DS18B20

More may work please report

Personal tools