1Wire

From ago control wiki
Jump to: navigation, search

1-Wire OWFS

ago control supports 1-Wire (OWFS). You easily can install the package:

agocontrol-owfs

Configuration

Mind to change device settings in /etc/opt/agocontrol/conf.d/owfs.conf . This example would specify a 1wire device that shows up as serial port:

[owfs]
device=/dev/ttyUSB1

You also can add a custom UDEV rule to assign a specific name to the device - have a look here. Some devices like the DS1490F don't provide a usbserial port. Use the following setting for them:

device=u

Please also adjust the permissions for such devices via udev. Create a file named "/etc/udev/rules.d/99-owfs.rules":

SUBSYSTEM!="usb_device", ACTION!="add", GOTO="owfs_rules_end"
 
# DS2490 1-Wire adapter
ATTRS{idVendor}=="04fa", ATTRS{idProduct}=="2490", MODE="660", GROUP="agocontrol"
 
LABEL="owfs_rules_end"

You don't need to configure the 1wire slave devices, they will be auto-detected on the 1-wire bus.

Startup

Start the service:

systemctl start agoowfs.service
Personal tools